2024 New Holland DuraDisc™ Heavy-Duty Disc Mowers 210M

Information

2024 New Holland DuraDisc™ Heavy-Duty Disc Mowers 210M

Durability Is Standard

DuraDisc™ heavy-duty disc mowers combine fast cutting with trouble-free operation and easy servicing to provide you with dependable performance season after season.

Mowmax™ Disc Cutterbar 3-Year Factory Warranty

The MowMax disc cutterbar breezes through tough mowing conditions and is backed by a three-year factory warranty so you can cut close with confidence.

Standard Quickmax™ Knife Change System

The QuickMax knife change system makes it easy to keep knives sharp for the close, clean cut you want and increased tonnage.

Four Models

Choose the side-pull model with a 10’4” (3.2 m) cut or from three quick-hitch compatible mounted models with cutting widths from 6’8” to 9’2” (2 to 2.8 m).

Dependable, Clean Cutting With Time-Saving Convenience

Forage quality directly influences livestock weight gain and milk production. Maximize the return of your hay field with improved forage quality and tonnage by choosing the clean, uniform cut that begins at the MowMax™ cutterbar of New Holland DuraDisc™ heavy-duty disc mowers. By cutting closely and cleanly, DuraDisc mowers leave less crop behind to increase tonnage with every cutting to boost weight gain, milk production, and ultimately the profitability and success of your operation.

Features may include:

Durability, Clean Cutting, Less Downtime.

You can depend on rugged DuraDisc™ disc mowers to slice through tough conditions, mow smoothly and quickly, and give you the peace of mind you only get with the MowMax™ cutterbar.

Increased Productivity With Built-In Confidence.

The New Holland heavy-duty DuraDisc™ 210M pull-type disc mower combines the benefits of a wide 10-foot, four-inch cut with easy hookup and a low horsepower requirement.

Fast, Smooth Mowing In Three Sizes

You can depend on rugged DuraDisc™ mounted disc mowers to slice through tough conditions and mow smoothly and quickly.

Choose from three mounted models:
  • DuraDisc 107M - 5 discs - 6’8” cutting width
  • DuraDisc 108M - 6 discs - 7’10” cutting width
  • DuraDisc 109M - 7 discs - 9’2” cutting width

Photos

Highlights

  • Armstrong, British Columbia
  • 2024
  • New Holland
  • DuraDisc™ Heavy-Duty Disc Mowers 210M
  • Available
  • Swath: 2413 mm (95 in.)
  • Cutting: 24-81 mm (0.95-3.2 in.)

Specifications

  • 2024
  • New Holland
  • DuraDisc™ Heavy-Duty Disc Mowers
  • 210M
  • Disc Mower Conditioner
  • Shaft spline: 6-spline
  • Minimum PTO horsepower required: 44.7 kW (60 Hp)
  • Slip clutch
  • Disc: Bevel gears in sealed modules
  • 27 x 9.5 x 15 6 PR
  • Disc: 3000 RPM | Input speed: 540 Rpm | Maximum transport: 32.2 kph / 20 mph
  • Minimum relief pressure required: 103 bar (1500 psi)
  • Circuits required: Two remotes
  • Drawbar clevis hitch
  • PTO size required: 41.3 mm (1.625 in.) | Disc cutting diameter: 500 mm (19.7 in.) | Cutterbar operating range (degrees): +18 to -28 | Cutterbar tilt angle (degrees): -2 to -10
  • 4978 mm (196 in.)
  • 4648 mm (183 in.)
  • 1575 mm (62 in.)
  • Cutting: 24-81 mm (0.95-3.2 in.)
  • 3.2 m (10'4" ft. in.)
  • Swath: 2413 mm (95 in.)
  • 1186 kg (2610 lbs.)
  • Cutterbar gear protection: Easy replace ShockPRO™ hub with a partial complement of sacrificial splines | Number of discs: 8 | Cutterbar flotation: Vertical and lateral, adjustable springs
  • MowMax™ cutterbar, modular, with individual sealed reservoirs
  • Per Disc: 2